REKON OUTDOOR GEAR™ CT-1 CARBON FIBER TRIPOD WITH BH-1 BALL HEAD, VM-1 VICE MOUNT, AND RTA1 PICATINNY TO ARCA-SWISS MOUNT

REKON Outdoor Gear™ Ambush™ tripods combine precision engineering, innovative design, and value in support of hunters, precision shooters, military & law enforcement, and photographers. The REKON Outdoor Gear™  CT-1 Carbon Fiber Ambush™ Tripod features several key improvements over "adapted for use photography tripods".  The NEW REKON Outdoor Gear™ CT-1 Ambush™ Tripod incorporates unique heavy recoil resistant precision aluminum magnesium alloy transition assembly with REKON's proprietary designed reinforcements to critical leg attachment stress areas and leg latch mechanisms.  Additionally, by utilizing the included short Center Axis shaft the REKON CT-1 tripod can be optimized for shooting in the prone position or from shooting benches with tripod legs fully retracted and leg angle rotated out to furthest angle detent. The short center axis shaft provides for 2.25 inches of elevation adjustment while shooting prone or bench positions.

Key Features of the REKON Outdoor Gear™ CT-1 Carbon Fiber Ambush™ Tripod with BH-1 Ball Head, VM-1 Vice Mount,  and RTA1 Picatinny to Arca-Swiss Mount 

 REKON Outdoor Gear™ CT-1 Carbon Fiber Ambush™ Tripod:

• Unique heavy recoil resistant precision aluminum magnesium transition assembly with REKON's proprietary designed reinforcements to critical stress areas
• Loading weight capacity 35.2 lbs
• Corrosion resistant
• Advanced Lightweight 8-Layer Carbon Fiber Leg Construction
• Featuring 4-Section Tripod legs with 3 length adjustable sections
• Quick secure length adjustment with twist Lock / unlock
• Max leg tube diameter 1.14 inches / 29mm
• Tripod legs can be inverted and folded back 180 degrees to 18 inches making it small enough to carry
• Three selectable leg angle positions provide flexibility and enable shooting in cramped or irregular situations
• Includes 2 removable center axis shafts ("short" & "long") for maximum flexibility and shooting stability
• Long center axis shaft is optimized for widest range of shooting heights and accommodates shooters up to shooters 6ft 10in in height while standing
• Short Center Axis is optimized for shooting in the prone position or from shooting benches with tripod legs fully retracted and leg angle rotated out to furthest angle detent.  Additionally, provides for 2.25 inches of elevation adjustment while shooting prone or bench position
• Special full cover Leg latch mechanism design to mitigate sand, dirt or debris intrusion into latching mechanism 
• Stability enhancing column hook, located in the bottom of the center axis shaft allows you to hang additional weight from the tripod's center of gravity for increased stability
• Multi-Functional: 3-in-1 tripod, the tripod can be used in the traditional tripod configuration, converted into a full size monopod by screwing together the removable center column and removable tripod leg, or converted to a full size adjustable bi-pod by simply removing the removable leg
• Includes 2 sets of removable camo leg wraps in digital woodland and digital desert / grassland  for maximum breakup in hunting situations
• Non-slip rubber feet and steel spike feet for all terrain versatility
• Weight (long Extension Pole and BH-1 Ball head): 3 lbs 14.4 oz

Key Features of the REKON Outdoor Gear™ BH-1 Ball Head 

• Arca-Swiss compatible
• 360 degree panning
• Separate Head tension adjustment and Pan lock: Individual head tension and lock knob as well as pan lock aid in perfect adjustment settings
• Outside Diameter 46mm
• Heavy duty 36mm ball rated at 35.2lb loading weight
• Precision Aluminum alloy construction
• Extreme cold weather reliability- Ball Head factory sealed with artic cold resistant grease
• Ball Head Quick Release Accessory Plate with 1/4-20 screw interfaces with numerous camera, optic, etc mounts
• Bubble level

RTA1 Picatinny to Arca-Swiss Adaptor Mount:

REKON Outdoor Gear™ Tripod Adapter Picatinny Rail to Arca-Swiss Mount. Quickly attaches to any Arca-Swiss compatible hall-head while providing a direct attachment to Picatinny rails of Mil-STD-1913 or Stanag 4694 / 2324 configuration. Eliminate the added weight and bulk of a vise style mounts with this adapter. Heavy duty and secure - requires 3 open slots on picatinny rail for attachment. ***Picatinny Rail Not Included - You have a picatinny rail installed to utilize the RTA1 Picatinny to Arca-Swiss Adaptor Mount:***

Key Features:

• Perfect solution for mounting* your AR/Bolt Action directly to your tripod *Requires Picatinny rail *
• Eliminate the added weight and bulk of a \"vise style\" tripod mounts with this adapter
• Fits NATO Accessory Rail Stanag 4694 / 2324 and Mil-STD-1913 Picatinny rails
• CNC machined 6061-T6 Aluminum
• Hard-Anodized
• Arca-Swiss compatible plate
• Compatible with all Arca-Swiss compatible ball-heads
• Requires 3 open slots on picatinny rail for attachment

 REKON VM-1 Specifications:

• Construction: CNC machined from T6061 Aluminum with Type-III hard-anodized finish
• Weight: 22.6oz (640g)
• Jaw width: between 1.14inch (29mm) and 2.68inch (68mm)
• Overall Height: 3.93inch (100mm)
• Overall Length: 3.22inch (82mm)
• Picatinny rail length: 2.55inch (65mm), 6 slots
• Color: Flat Green
• Direct interfaceable with all REKON Ball Heads and other brands constructed to the Arca-swiss standard

Key Design Features:

• The base of the VM-1 mount is machined with Arca-swiss standard dovetail grooves allowing direct mounting interface to Arca-swiss standard ball heads (no "QR" or adaptor plates needed)
• 1/4" and 3/8" threaded mounting holes allow for the attachment of "QR" plate or direct mounting to various brand tripod depending on design configuration on your tripod/ball head

• Extended height VM-1 Arca-swiss column base eliminates frustrating clearance issues often found with ball head tension knobs and provides for the widest interface clearance of various ball head manufacturer control and tension adjustment knobs. The extended height VM-1 allows for positioning of VM-1 mount with either the locking knob on the left or right side depending on your preference.

• Built-in Picatinny Rail (STANAG 2324/MIL-STD 1913) for placement of various complementary accessories such as Laser range finder, IR target marker, video camera, weather/wind meter, illumination device, night hunting light, etc 

• Built-in Picatinny Rail offers enhanced predator and hog night hunting scanning capabilities via mounting an additional scanning light to the VM-1 vice mount and utilizing the fatigue free panning of the weapon on the tripod technique to locate animals

 REKON Outdoor Gear™ CT-1 Carbon Fiber Tripod with BH-1 Ball Head, VM-1 Vice Mount, and RTA1 Picatinny to  To Arca-Swiss Mount Combo Kit includes the following: